Find solution
How to use RCA cables?

Can I use the RWY rca cables to just do audio?

  • If I have component cables hooked up for the video. Can I take a RWY (all 3) and just use the RW to do the audio? Or do I have to buy RW cables to do the audio?

  • Answer:

    Use component for video = red, blue, and green. - You don't want or need composite video = yellow, so yes you can leave it unplugged. Right (right channel) and white (mono/left channel) is stereo audio. - If you only want stereo audio, then yes you can use these. S/pdif optical or s/pdif coaxial can do surround sound and stereo audio and is better than R/W stereo. Hdmi can do surround sound and stereo audio and is better than s/pdif optical and/or s/pdif coaxial.

CB6T65O5LTHTWZ26AJUMXYDDCM at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

It doesn't know that the video isn't connected anymore, because audio and video go through 2 seperate channels on the same channel if that makes sense. So you don't have to have the yellow one even connected to the other cords. As long as the red and white are there, it will work. You can also use only 1 cord (red or white) but that only gives you the left or right affects of the audio. So use both and it'll be good :)

Sam

Component video is 3wires only you might need separate audio cables for sound

Aaron Davis

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.