How to remove ignition switch?

How do you remove the ignition switch from a 1995 pontiac grand prix?

  • Recently bought a 1995 pontiac grand prix but the key is missing. So I would rather replace the ignition switch all together. How do I remove the old one when I don't have a key?

  • Answer:

    I didn't know Dodge made Pontiac's.

C2KETL6YPAAJG42PUIAYUNMG2U at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

disconnect the negative battery cable first to keep from setting off your air bag. Then you must remove the steering wheel. then you need a special tool to depress the steering wheel lock retainer. You can then remove the screws that hold your column together. you may want to undo the underdash and unplug the wiring going down through the steering column to make it easier to pull the blinker switch assembly out of the way. Then when you get down to that you will see a cut out where the key tumbler slides into the cloumn.. on some models there is a cut out but it's filled...just knock a small hole in it if it's not open. on other models there is simply a small screw that you remove and then it allows the tumbler assembly to come out. then put it back together in the reverse order.

Kenneth S

I think you need to put this on the Pontiac (GM) site not Dodge?

jjans4

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.