Find solution
How do I replace the line on my Zebco spincast reel?

How do you thread fishing line through a Zebco 33 reel?

  • the line got tangled around the nut, I had to trim some off. It's still wound in the reel, but how does it find its way out?

  • Answer:

    If at all possible, take it in to a sporting goods store that rewinds line. hopefully there will be someone there who knows how to correct the problem. I could certainly offer you all help you could need, but it becomes one of those things that it would be much easier for me to do it and fix it than to try and explain how to do it. Good luck!!

ZLZGDHFYAZV5D5XNJUOZKNI2PY at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

Unscrew the front of the reel exposing the metal faceplate, undo the screw and the spool cover will come off. Find the exposed end from when you cut off the line. Pull off about 24" of line, put the spool cover back on (Line still exposed) then thread the line thru the center hole in the reel face. Screw the reel face back on.You're back in business.......

JD

Some of them you just twist the cap on front of the reel to the left about 1/4 inche and pop it off. Stick the sting back thru the hole and pop it back on.

cold_fearrrr

Not sure I understand, but you can pop the face of the reel off then clean it out or re-spool.

justfish

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.