Find solution
How should I fix my surf board?

I was wondering? how would i fix up a surf board?

  • its in pretty good shape.but it needs some work done to it.sanding?what type of sand paper?or do i even use sand paper on it?help me if you can. thank you

  • Answer:

    Depends mostly on the board type. Fixing an epoxy board is similar to fixing a fiberglass board, but it's a little more work. For either type of board you can purchase ding kits that will come with a small amount of everything you need. As for sanding, use a medium to high grit sandpaper (100-200 grit) and just scuff up the area. Then you can use whichever patch material (glass and epoxy resin or just epoxy resin) is appropriate to patch the area. My ding kit has light activated epoxy so I patched my board sitting on the beach. I used sand and water as sand paper once, and it worked just fine. With the light activated epoxy, it takes about 15 minutes to set and harden, then you're back in the water. Other resins will take from an hour to 24 hours to set, so make sure you know which one you're using.

4GVOLMWG7Z7LH4BL55R5KMPFPA at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

The second answer is correct. That would be the easiest way. It also has instructions given in the package with purchase.

Tyson boy's dad

Since you didn't say what the exact problem you want to fix is, I suggest you read the chapter on board repair in my online surf book (Ch 7). Gives you a lot of information on fixing about anything. It sounds like you want to re-gloss? If this is the case, follow the directions provided but understand that your board will be heavier now matter how much of the original finish you sand off (unless you sand clear through your glass). If you are making a simple repair, you only need to rough up the repair area with a light grit sandpaper, add your sun cure or resin filler, and then let it start to harden. Sand with a light grit until smooth, then buff out for a shiny finish. There are also many other sources, with pictures, on how repair boards on the Internet. Take a look in the repair section of the surf library.

The HB Snake

You probably need to glass it first and then sand. I'm sure you can find a restoration site if you do a search.

m_c_m_a_n

the only way i know is to buy a new one

Bofeng

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.