How can I fit K2 bindings on a burton board?

If your k2 bindings are semi recent than they already come with a universal mounting plate....thats one of there big selling points you just rotate the disc 90deg. for the 3 hole burton style....couldn't be easier

Yes! You will either need a 6x6 adapter for the 3 hole pattern unique to Burton boards or the binding plates themselves may already have extra holes built in. You can simply set the bindings on the board and see if the holes line up and go from there. Regardless, if you have any doubt at all, take them to your local shop or ski resort and have a professional tech set them up for you. Definitely worth the few $$ to be safe!!! Ride on...

you can't. burton designed their boards so that only their bindings will fit into the screw holes. the holes are set up in a unique pattern that only burton bindings have in their base plates. you either need to steal some burton base plates or simply invest in burton bindings. i would suggest doing the latter simply because burton makes exceptional bindings. the Burton Custom bindings is considerably cheap and it also responds very well to your foot. bindings are one of the most important investments you can make to your snow kit.