Find solution
What kind of steel are railroad tracks made from?

What kind of steel is use to make railroad tracks?

  • Answer:

    It's not any special steel by any means. It's just a common steel. Remember, steel wheels only roll on it. The quaility in the manufacturing has to be high though. Any small air pockets in the metal, or hair line cracks will over time cause a fracture. The only time heat is a factor is when the train brakes are applied. Heat is a critical component for the brakes to function. But only a very miniscule amount of this heat could ever be transferred to the rail. The rails just sit there and support a lot of weight, so common steel works just fine. The size of a rail is measured in pounds per 3 feet (one yard). 70 pound rail (per yard) is fine for a branch line railroad that maybe has shorter trains at slower speeds. For the mile long trains of today, 130 pound rail is more suitable. I've seen small industrial railroads that were built of 30 pound rail. This is the formula for the weight a rail can support, with ties properly spaced. A rail can support 300 times each pound weight per yard. So, a 60 pound rail can support 300 times 60, or 18,000 pounds per wheel, and 36,000 pounds per axle (18 tons). That means it can carry a car or engine no greater than 72 tons. A quick analysis of 130 pound rail is it can support a car or engine no greater than 156 tons. Some engines weigh upwards of 220 tons, but their weight is spread out over six axles instead of four. And I don't know the forula for computing this part.

QZK4K4QXEVZFLF3MBODSL4DMLY at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

Very high-grade, prestressed steel which is designed to take both the weight and the friction of trains weighing hundreds or thousands of tons travelling over it. It is rolled into shape at the steelworks, in lengths several hundred yards long which need special trains to take them to the construction site and lay the rail. The lengths of rail are welded together but every so often an 'expansion' joint is inserted to prevent the rail buckling under excessive heat. If the rail has been properly laid and properly maintained it will stand up to all the stresses and strains of heavy use, and last 20 years or more before it needs to be replaced. Before the days of welded rail the lengths were about 60ft which is the average length of a passenger carriage and a gap of about 0.25" was left between each rail to allow for the expansion. This is what caused the 'clackety-clack' sound which is now virtually absent from railways today. Special rail vehicles equipped with plasma rays are sent over each stretch of line from time to detect any hair line cracks which might appear in the rail which are invisible to the naked eye, but will show up on the scientific equipment. These cracks are rare but there is a slight chance they may happen and if found, the offending section of rail can be replaced before it becomes dangerous. In earlier days, rails were made of the best quality steel that was available and when no longer fit for use, were often recycled and made into fence posts, supports for station awnings, and other light structures. In this form they can sometimes survive for many decades.

squeaky guinea pig

Derail and Rango are engineers. And I can tell you with confidence that both of their answers are correct. I am a member of a local train club. I can only tell you this. That Iron is really heavy! Good Luck!

Teknoman Saber

Most rails in the UK were made at Barrow in Furness steel works. If you look on the side of old rail systems you will see *Furness Steel* on them. When India was a British Empire country all the rail infrastructure was of Furness Steel and still is after all the years. A friend I know in India went to look when I told him and came back to me in amazement. He said that in all his years a a rail fanatic he had just learned something.

tucksie

rr track is hot rolled manganese steel

tronary

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.