Find solution
How To Connect Two Different Network Segments Using A Switch And A Router?

Over Ethernet, how can I connect two computers without using a hub, switch, or existing network?

  • Answer:

    Crossover cable! You also need to setup the IP's manually, because they will not connect automatically. Put them in the same network subnet, but dont give them the same IP.

C7FTRNG6XNMRYM2VLRFJMTDVCU at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

If you can't find a good answer here try: http://www.yahoomail.com Ja

tedsilverbwn0

Use a crossover cable.

Cupcake

I believe you could do it with a crossover ethernet cable connected between the network cards of each computer. Hubs are so cheap though .

Bob-O

You need a crossover cable and set up your computer. Here is a link with the same question. http://kb.iu.edu/data/aeii.html

Oscar

What you are looking for is an Ethernet Crossover Cable. You should be able to pick one up at your local computer shop. Just make sure you realize that you are looking for a crossover cable, not a standard Ethernet cable (which requires a network device like a router/switch/hub).

Jim Maryland

You can simply connect the two using a cross-over cable

James K

If you can't find a good answer here try: http://www.sent.com Ja

tedsilverney0

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.