Gateway Monitor Problems?

Gateway Monitor Problems

• Answer:

  Gateway is one of the most popular computer hardware brands, and it has focused on developing laptops, desktops and other computer peripherals. The brand gained fame and recognition for the crisp and clear display images of its solo monitors. These monitors, however, are sometimes prone to problems, but they can be easily repaired once their issues are properly addressed. Causes There are many causes for problems involving Gateway monitors, but most of them occur due to the wrong settings of screen savers or software conflict with the computer's video card in which the monitor is used. Among the common issues of Gateway monitor problems include bent or broken pins with the monitor cable, wrong configuration settings with the video card, environmental factors, corrupt video drivers and improper placement of video card inside the computer's motherboard. Troubleshooting When troubleshooting Gateway monitors, the first step is to disable the screen saver, in case it is enabled. The Windows "Power Management" option should also be turned off, then remove the cable connections from the switch boxes and reconnect the monitor directly to the computer. When display issue only takes place on one program, enable VGA mode to see if the video drivers are interfering with the program display. If this is the case, then upgrade the video card drivers to make the monitor display compatible with the program in conflict. Cable Issues Check if there are broken or bent pins in the cable, and if there are any, have the cable replaced with a new one to ensure proper monitor function. Make sure the cable connections are properly secured and plugged in to the proper sockets, as loose cables can cause distorted displays and poor reception of video signals from the computer. Be careful when reconnecting the cables and turning the computer on, as electrostatic discharge is released each time the computer system is switched on, which in turn may cause electric shock and damage not only to the monitor, but to the whole computer as well. Output Settings If the Gateway monitor is out of sync, then this can be due to incorrect output settings. These can be adjusted by pressing the "Menu" button on the monitor, then selecting the "Output Level Setting" option. The "Display Properties" section in the Control Panel can also help in improving the monitor's screen display. Video Card Issues When the monitor is tested on another computer and works perfectly, then the problem might be with the video card of the computer, and most likely it is damaged. Have the video card replaced with a new one, then upgrade the computer's video drivers so they can provide the appropriate video signals for the monitor do display.