How to set up rope climbing?

How to Set up a Top Rope Anchor System for Rock Climbing

• Answer:

  Rock climbing is an exciting sport, but it can also be dangerous. The main goal of anchoring systems is to minimize the danger. Free climbers climb mountains or rocks from the bottom and place protection against a fall along the way. Top roping a section of rock allows for safety. Placing an anchor for top roping is an art. Difficulty: Moderate Instructions Select strong points at the top of the section of rock to attach anchors for the rope. Points that work well are trees with a runner wrapped around the trunk. Other strong points may be an outcropping of rock to wrap around a runner. Place the runners around strong points at the top of the climbing route and link them together by a carabiner. Run the rope used for climbing through the carabiner. This makes a strong point of protection to save a climber from a fall. Put multiple points of protection at the top that protect against falls from all angles so that falling off one side or the other off center will not pull out all protection points. If this happens, the climber may take a serious fall and become injured or even be killed. Position extra protection below the main top rope protection point if you wish to shift the route to the left or right of the main route. This allows the rope to be used to climb more areas of the rock face without having to completely re-rig your top rope safety points. Tips & Warnings Tip: The top rope anchor is only as good as the belaying climber that is holding the climber on the rock face. Tip: The main way to ensure safety is redundancy. You can't place too many points of protection and always do your best to place opposing points. Protection points that pull from opposite directions keep the rope centered over the route and keep your protection from slipping.