What is light industrial work?

What would make a breaker blow and a switch spark then the light switch not work once the breaker was reset

  • Light switch sparked then the breaker blew and the light and fan would not turn on. Once breaker was reset, the light switch still would not turn on the light or the fan. Now the dryer will not work either, and it is on a different breaker that was blown too. Once reset, the dryer will not come on.

  • Answer:

    The only thing that can make a breaker blow and a switch spark then the light switch not work once the breaker was reset is a short in the circuit the breaker is controlling. You need to check all outlet, switch, and junction box in line with the circuit. You can also check out overhead fixtures and ceiling fans to see if they are in good condition. If you find any difficulty, check with a technician.

PamsPlace777 at Ask.com old Visit the source

Was this solution helpful to you?

Other answers

The switch may have failed, or something else in the switch box may have shorted and tripped the breaker. If the short burned through before the breaker tripped, then it wouldn't reappear after the breaker was reset. What did when you turned the breaker off and pulled the switch? Is the dryer gas or electric? Did you turn the breaker for it all the way off before turning it back on?

Nashcat

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.