Whats wrong with my lawn mower?

Lawn mower only starts with a screw driver whats wrong?

  • it has to be simple,,cough so whats that say about me??? hmmmm back to question, turn key nothing happens jump solenoid with screwdriver and starts rigjht up, thinking need to put a sbf in there and just hotwire it,lol,does anyone remember how to hotwire a car?????

  • Answer:

    Check the safety switches before you start hot wiring things. Aslo the key switch, and MAKE SURE PTO SWITCH IS OFF!!!!! MOWER BLADES ARE NOT ENGAGED!!!!!!!! http://www.stevesequipmentrepair.net

motox at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

Well it sure sounds like the ignition switch or the wire connections are the culprit here.

Denis Mitrowski

It could be a bad starter solenoid. Or it could be the brake/clutch pedal safety switch. Also could be the ignition switch. With the key in the start position you should get 12 volts to the small wire on the solenoid. If you do, than suspect the solenoid. If you don't get 12 volts to the small wire than you have to suspect either the clutch/brake switch or the igintion switch.

renpen

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.