What is a good lamp-free projector?

Sattelite Receiver (DM500S) to Projector (HD600X)?

  • Hey guys. I've been using my Dreambox DM500S Sattelite Receiver on my tv using a scart cable and it works perfectly fine. Recently bought a projector, Optoma HD600X which works fine on HDMI (have been playing PS3 on it). http://www.amazon.co.uk/Optoma-HD600X-Ready-Cinema-Projector/dp/tech-data/B003CLU6QW/ref=de_a_smtd http://www.dreambox.org.uk/dreambox-dm500s.html Now i'm trying to hook up the DM500s to the Projector. I read online that as long as the DM500s has an RBG Scart output, it will be able to be connected into the VGA port of the Projector (the VGA port on the projector says SCART/COMPONENT/PC. So i bought a 15 quid HAMA Scart to VGA cable which is apparently MADE to connect DVD Players/other scart devices to a VGA input on a projector. http://www.amazon.co.uk/Hama-SCART-To-VGA-cable/dp/B0002W69MY I connected it up and i got no signal coming through to my Projector. I then set the Projectors settings to NTSC instead of PAL and the projector picks up a signal (with the colours all wrong), then loses the signal after 5 seconds. If i turn the Receiver on then off again, it will again find the projector in NTSC then lose it after 5 seconds again. Any ideas what is going wrong and how i could get this set up working? Thanks

  • Answer:

    You probably need the official SCART to VGA convertor adapter plug from Optoma.

Ali at Yahoo! Answers Visit the source

Was this solution helpful to you?

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.