What is a good cheap amp for a fi btl?

What kind of amp should i get for FI BTL 15' sub?

• Its Dual 2 Ohm Fs: 35.6 Hz | 34.6 Hz Re: 0.7 Ohms/coil | 1.4 Ohms/coil Qms: 5.72 | 5.90 Qes: .24 | .22 Qts: .23 | .22 Mms: 256g | 272g Sd: 810cm^2 | 810cm^2 Vas: 71.6 l | 71.6 l Spl: 93.2dB 1W/1m | 93.1dB 1W/1m Bl: 18.3 N/A | 27.2 N/A Xmax: 28mm * | 28mm * Rms: 2000W * | 2000W * Sealed box: N/A cuft | N/A cuft Ported box: 3-5cuft | 3-5cuft Sub OD: 15.625” | 15.625” Cut ID: 14.125” | 14.125” Mounting depth: 8.750” | 8.750” Displacement: 0.21cuft | 0.21cuft Any kind of suggestions would be great, thanks

• Answer:

  HQ Incriminator audio IA20.1 Rockford Fosgate T20001bd Sundown audio saz2000.1d ( they are on pre order right now ) Atomic AT-2200.1d American Bass VFL120.1 Budget Powerbass ASA2000.1dx Soundstream PCX2000.1d Hifonics BXI2610d Fusion NV25001d These are just a few sugg. ,but keep in mind that the Budget amps are nowhere near as efficient as the HQ ones listed , so keep in mind that your electrical will need to be upgraded to run those amplifiers and get close to the rated power( i.e.Hifonics BXI2610d - 2600 rms/ 1ohm @ 14.4 v even according to maxxsonics there will be a drastic difference between 14.4v and 13.6v.