Find solution
Does audiopipe make good subs?

What size amp would i need to make my subs slap hard?

  • i have 2 mtx subs and for my birthday i am going to get a vented box for them. Also im going to get 2 10 in subs in a vented box.What size amp would you use to make them hit really hard...i rather have them hit hard them like really good quality of the music...or what amp would you use

  • Answer:

    I would use 1000 watt amp any brand would do

Wesley at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

If your subs are 500watt each and you have 4 of them you should get a 1000 watt amp that way if you have to much power you can always turn it down. getting an amp with more power than needed is always better than one that is to small.

Labtec

throwing around numbers like 2000 and 3000w 4 channel amps is a pretty good indicator you're looking at some peak power ratings, which you should recognize are completely meaningless. I would not recommend mixing it up with 10's and 12's. It would make a lot more sense to just get better 12's if you want to upgrade. Car audio is one of those things where more is not always better. Edit your question again and include the model of your mtx's along with their voice coil configuration. Are they Terminator's, Thunders', Jackhammers? Dual voice coils, single? 2 ohms, 4 ohms?

N2Audio

This one is the best. I like lanzer LANZAR VCT2610 6000 WATTS 2 Channel High Power MOSFET Amplifier Technical Details - 5 Position Electronic Adjustable Panel - 16 - 9 Wide Screen - Full Function OSD Touch Screen - High Resolution and High Definition Picture capability - DVD/SVCD/VCD/CD/CDR/CDR/RW Player Built-In ESP (Electronic Shock Protection)

Ama A

1000 to 1500 make sure its a monoblock amp and the tens u get are the same impedence as the other ones such as 4 ohm single voice coil or 4 ohm dual voice coil etc......... and that way you can run it all off the monoblock amp

Alyx

Look at the rms of the subwoofers.. if they can handle 500 watts each then go for a 1000watt amp... i have 2 kicker comps 10 inch and they only use 150 rms so im using a 500 watt amp

marc

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.