How do i hook up a car stereo and speakers without using an amp?

Just take the speaker wire that is already ran to the speaker and use those. find the speakers take them out and that is what you need to plug your new speakers in.. if they wont connect onto the speaker for any reason splice the wires and go to your local car care store and buy connectors for the wires, then connect the wires to the speakers. The speakers MIGHT just hook right up to the speakers. if not just connect the posative wire to the posative prong on the speaker, and do the same with the ground. If you mix up the two wires it wont hurt anything to turn the car on, if it works, you have them connected right. If it doesn't work, you have your wires mixed up. Good luck! need anymore help e-mail me.

Head units have inputs / outputs for power, speakers. These are mostly universal and would fit with your car's wiring harness and all you may need to do is plug them in

Speaker out puts.

use your speaker wiring is color code to check left right rear ok gray is right front spk,white is left front spk,violet is rear right spk green is rear left spk now you know you got 4 speaker out put now you can running wires from spkrs to your stereo

For most after market systems you can get a connection that wires to your radio and plugs into your cars wireing harness which connect's your speakers along with everything else ...except your antenna.

There should be speaker outputs on that head unit, just use those